? 201 3 sensitron semiconductor ? 22 1 west industry court ? deer park, ny 11729 - 4681 phone (631) 586 7600 fax (631) 242 9798 ? www.sensitron.com ? sales@sensitron.com ? s ensitron ________ s emiconductor technical data data sheet 5275 , rev b three phase full wave bridge rectifier assembly description: 1200 v, 45 a, 500 n anosecond three phase bridge rectifier assembly max. ratings / elect rical characteristics all ratings are at t a = 25 o c unless otherwise specified. rating conditions min typ max unit peak inverse voltage (piv) - - - 12 00 vdc average dc output current (t c = case temp) (i o ) t c = 55 o c t c = 100 o c t c = 125 o c - - 45 28 1 6 a average dc output current ambient temp . (no heat sink) (i o ) t a = 25 o c t a = 55 o c t a = 100 o c - - 8 .0 5.0 2. 5 a peak single cycle surge current (i fsm ) t p = 8.3 ms single half cycle sine wave - - 300 a ( pk) operating and storage temp. (t op & t stg ) - - 55 - +150 ? c maximum forward voltage (v f ) (300 ? sec pulse duty cycle < 2%) i f = 9 a i f = 45a - - 1. 40 2.10 v maximum instantaneous reverse current at rated (piv) t a = 25 ? c t a = 100 ? c - - 5 0 5 00 ? a reverse recovery time (t rr ) i f = 0.5a, i r = 1.0a, i rr = 0.25a - - 50 0 nsec thermal resistance ( ? jl ) per leg - - - 4.0 ? c/w weight - - 16 - gms note: add a suffix s to the part number for jan - s level screening . SBR1001
? 201 3 sensitron semiconductor ? 22 1 west industry court ? deer park, ny 11729 - 4681 phone (631) 586 7600 fax (631) 242 9798 ? www.sensitron.com ? sales@sensitron.com ? sensitron technical d ata data sheet 5275 , rev b mechanical dimensions: in inches SBR1001 disclaimer: 1 - the information given herein, including the specifications and dimensions, is subject to change without prior notice to impro ve product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2 - in cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, m edical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users fail - safe precautions or other arrangement . 3 - in no event shall sensitron semiconductor be liable for any damages that may result from an accident or any other cause during operation of the users units according to the datasheet(s). sensitron semiconductor assumes no responsibility for any intellectual proper ty claims or any other problems that may result fr om applications of information, products or circuits described in the datasheets. 4 - in no event shall sensitron semiconductor be liable for any failure in a semiconductor device or any secondary damage resulti ng from use at a value exceeding the absolute maximum rating. 5 - no license is granted by the datasheet(s) under any patents or other rights of any third party or sensitron semiconductor. 6 - the datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed w ritten permission of sensitron semiconductor. 7 - the products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their applicat ion will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. when exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulat ions.
|
